Buyer guide

Plastic moulding in China: tooling, samples and who owns the mould

Plastic moulding has one big cost that comes before any parts: the mould. It's made once, it's specific to your part, and it decides much of the quality and unit cost for years.

That's why the questions around it matter so much. How is it built? How do you approve it? And who owns it when the order is done?

This guide explains how tooling works in China, what to expect from first samples, and how to settle mould ownership before tooling starts.

At Notch Sourcing we source almost any product from China, through our specialist team on the ground. Plastic moulding is one of our strongest areas, alongside supplements, skin care, printing and packaging.

How the process runs

1. Your drawing or sample

Start with a 3D file and drawings with tolerances, or a sample to copy. Add the material, colour, surface finish, quantity and the market the part is for.

2. Design for manufacturing review

Before cutting steel, a good factory reviews your design for moulding. It looks at wall thickness, draft angles, ribs, undercuts and where the plastic enters the mould. Expect suggestions. Small changes now can avoid sink marks, warping or a more complex mould later.

Agree any changes before the mould design is fixed.

3. Mould design

The factory designs the tool: how many cavities, where the gates and ejector pins go, how it cools, and whether it needs side actions or inserts for features like clips or threads. Ask to see the mould design before steel is cut.

4. Making the mould

The mould is machined, fitted and polished or textured to your finish. This is usually the longest single stage before samples.

5. First trial: T1 samples

The first parts from the first trial run are called T1 samples. They usually show small issues: a dimension slightly out, a visible mark, a part that sticks. That's normal. The mould is adjusted and tried again, T2, T3, until the parts match the drawing.

Measure the samples against your drawing. Check how the part assembles, works and looks. When a sample is right, keep it as the reference for production.

6. Production

Once the samples are approved, production starts. Parts should match the approved sample, run after run. Our guide on pre-shipment inspection covers how to check that before goods leave.

What drives the mould cost

Mould quotes vary widely, and for real reasons:

  • Part size and complexity. Bigger parts need bigger moulds. Undercuts need side actions.
  • Number of cavities. A multi-cavity mould makes several parts per cycle. It costs more to build, but can lower the unit price at higher volumes.
  • Mould steel. Harder steels last longer and cost more. The right choice depends on how many parts you expect over the mould's life, and on the plastic.
  • Surface finish. High polish or textures add work.
  • Hot or cold runner. Different systems for feeding plastic into the mould, with different costs and waste.
  • Family moulds. Several different parts in one mould can save tooling cost, with some trade-offs in control.

Ask every factory to quote against the same drawing, the same material and the same expected volume. Otherwise you're comparing different moulds.

Who owns the mould?

There's no single answer. It depends on the deal you make with the factory. The common options:

You pay for the mould and own it

You pay the tooling cost, usually in stages, and the mould is your property. The factory keeps it and uses it for your orders.

Why buyers choose it: you control the tool. You can, in principle, move production to another factory.

What to check: owning it on paper isn't the same as getting it back. Agree the release terms up front.

The factory owns the mould and builds the cost into the unit price

You pay little or nothing upfront. The factory recovers the mould cost through the price per part.

Why buyers choose it: less cash up front, which helps a first order.

What to check: you can't take the mould with you. If you move factories, you'll need a new one. Ask how the unit price changes once the mould cost is recovered.

A split

You share the cost, and the agreement sets out who owns what, for example ownership passing to you after a set number of parts, or a buy-out price.

Why buyers choose it: a middle path on cash and control.

What to check: the details. Splits only work if both sides read them the same way.

Agree it in writing before tooling starts

Whichever option you choose, put it in a written agreement with the factory before any steel is cut. It should cover:

  • Who owns the mould, and from when
  • What you pay, and when
  • That the mould is used only for your parts
  • Where it's kept, and who insures it
  • Who pays for maintenance and repairs
  • How long the mould is expected to last, and what happens when it wears out
  • How and when the factory will release it to you, if you own it, and who pays for removal and shipping
  • Marking the mould with your part number and owner

Don't leave this to an email thread after the first order. Once the mould exists, your bargaining power drops.

Notch Sourcing doesn't set a default. The right option depends on your volumes, your budget and how long you expect to make the part.

Rules stay with you

If parts touch food, go to children, or are sold in markets with chemical rules such as California's Proposition 65 or the EU's REACH regulation, you're responsible for compliance. Choose the plastic with that in mind, and check requirements with your own advisers.

How Notch Sourcing helps

We source almost any product from China, through our specialist team on the ground, for B2B buyers in the US, Europe and the Middle East.

  • We find moulding factories that fit your part, material and volumes, and we visit them before they reach your shortlist.
  • You check samples before you commit to production.
  • Our own team in China inspects the goods before they ship.
  • If the part needs packaging or print, product, packaging and print are handled as one job, with one contact.

Not sure whether to bring your own design or adapt a factory's? Read private label, OEM or ODM. Comparing quotes? Read about landed cost to the US or to the EU and UK, and how to vet a Chinese supplier.

Have a part to make? Send us a brief with your drawing or sample, the material and the quantity, or email enquiry@notchsourcing.com. We reply to every brief.

Questions

Common questions

Who owns an injection mould made in China?

It depends on the deal. The buyer may pay for the mould and own it, the factory may own it and build its cost into the unit price, or the cost and ownership may be split. Agree it in writing with the factory before tooling starts.

Can I move my mould to another factory?

Only if you own it and your agreement says the factory will release it. Agree the release terms, who pays for removal and shipping, and what condition it should be in, before tooling starts.

What are T1 samples?

T1 samples are the first parts from the first trial run of a new mould. They usually show small issues that need adjusting, followed by further trials until the parts match the drawing.

Why do mould quotes differ so much?

Mould quotes depend on the part size and complexity, the number of cavities, the mould steel, the expected tool life, the surface finish and whether side actions or inserts are needed. Compare quotes against the same drawing and the same assumptions.

Can Notch Sourcing help with plastic moulding?

Yes. Plastic moulding is one of our strongest areas, and we source almost any product from China through our specialist team on the ground. Send a brief at notchsourcing.com/#contact or email enquiry@notchsourcing.com.

Have a product in mind?

Tell us what you want made. We will come back with next steps.

Send a brief