Once goods leave the factory, fixing a problem gets slow and expensive. The cartons are on a ship. The balance is paid. The factory has moved on to the next order.
A pre-shipment inspection is the last point where you can still say "not yet". This guide explains what it checks, how the units are picked, and what to agree with the factory before production so the inspection actually protects you.
At Notch Sourcing we source almost any product from China, through our specialist team on the ground. Inspections before shipment are done by our own team in China. We're strongest in supplements, skin care, printing, plastic moulding and packaging, and the method below works for any product.
When it happens
A pre-shipment inspection takes place when production is finished and most or all of the goods are packed for export. The goods are still at the factory, and the balance hasn't been paid.
That timing is the point. The inspector sees the finished goods in their real packaging. And if something is wrong, you can still hold the shipment and the payment until it's fixed.
What gets checked
A good inspection follows a checklist agreed in advance. It usually covers:
Quantity
Are all the units made and packed? Does the number of cartons match the packing list?
Packaging and marking
- Retail packaging matches the approved proof: colours, text, barcodes, languages
- Labels and inserts are present and correct
- Cartons carry the right shipping marks
- Cartons are strong enough for the trip, and packed as agreed
Appearance and workmanship
Scratches, stains, flash on plastic parts, print defects, loose threads, poor gluing. The inspector compares the goods with the approved reference sample.
Measurements
Key dimensions and weights, checked against your drawing or spec.
Function and specific tests
Does it work as it should? Depending on the product, that might be assembly, opening and closing, a seal check, a drop test on cartons, or a barcode scan.
Product-specific checks
You add the checks that matter for your product. For a supplement, label text and batch coding. For a printed box, colour against the proof. For a moulded part, the dimensions that affect assembly.
How units are picked: sampling and AQL
Inspectors don't check every unit. They check a sample, picked at random from the packed goods, using a recognised sampling method.
Most inspections use tables from sampling standards such as ISO 2859-1. You choose:
- An inspection level, which sets how many units are checked for a given batch size
- An acceptance quality limit (AQL) for each defect type, which sets how many defects in the sample are acceptable
Defects are usually sorted into three types:
- Critical: unsafe, or breaks a legal requirement
- Major: likely to cause a return or a complaint
- Minor: a small flaw that won't usually stop a sale
Critical defects are usually set so that none are accepted. You set the levels for major and minor defects with your inspector, based on your product and your customers.
What the result means
The report should give a clear result for each part of the checklist, with photos, measurements and a list of defects found.
- Pass: the sample met the levels you agreed.
- Fail: it didn't. The report shows where and why.
- Pending: something needs your decision, such as a small deviation from the spec.
A pass doesn't mean every unit is perfect. It means the batch met the levels you set, based on a properly drawn sample.
Agree it with the factory before production
An inspection only protects you if the factory has agreed to it. Before production starts, agree:
- That goods will be inspected before shipment, and before the balance is paid
- The checklist and the AQL levels
- The reference sample the goods will be compared with
- What happens on a fail: sorting and rework with a re-inspection, replacement, or a refund
- Who pays for a re-inspection if the goods fail
A factory that pushes back on an inspection is giving you useful information. Our guide on how to vet a Chinese supplier covers other signs to watch for.
Other checks along the way
A pre-shipment inspection is the most common check, but not the only one. Depending on the product and the risk, buyers also use:
- Factory checks before choosing a supplier, often with a site visit
- Checks during production, to catch problems early on long runs
- Container loading checks, to confirm the right goods and quantities are loaded
New products, new factories and first orders usually deserve more checks than repeat orders from a supplier you've worked with before. Even then, a short check before shipment is cheaper than a problem found on arrival.
Where packaging and print fit in
Many failed inspections aren't about the product at all. A wrong barcode, a label in the wrong language, a box that's crushed in transit. If packaging and print come from different suppliers, each one needs checking too.
That's one reason we handle product, packaging and print as one job. For packaging timelines, see custom packaging lead times. For moulded parts, see tooling and mould ownership.
Inspection isn't compliance
An inspection checks the goods against your spec and your agreed levels. It doesn't approve a product for your market. Lab tests, certificates and labelling rules are separate, and they're the importer's or brand's responsibility. Check them with your own regulatory advisers. We help arrange the test reports and documents your market asks for.
How Notch Sourcing helps
We source almost any product from China, through our specialist team on the ground, for B2B buyers in the US, Europe and the Middle East.
- We visit factories before they reach your shortlist.
- You check samples before you commit to a full run.
- Our own team in China inspects the goods before they ship.
- Product, packaging and print are handled as one job, with one contact.
See our pages for buyers in the US, the UK and Europe and the Gulf.
Planning an order? Send us a brief with the product, quantity and market, or email enquiry@notchsourcing.com. We reply to every brief.
Questions
Common questions
When does a pre-shipment inspection happen?
When production is finished and most or all of the goods are packed, before the goods leave the factory and before you pay the balance. That way the inspector sees the finished, packed goods you will receive.
What is AQL?
AQL stands for acceptance quality limit. It comes from sampling standards such as ISO 2859-1 and sets how many units are checked and how many defects of each type are acceptable in that sample. You choose the levels with your inspector before production.
What happens if the goods fail inspection?
That depends on what you agreed with the factory. Common outcomes are sorting and rework followed by a re-inspection, replacement of the faulty goods, or a refund or price reduction. Agree this before production starts.
Does a pass mean every unit is perfect?
No. An inspection checks a sample, chosen by a recognised method, and tells you whether the batch meets the levels you agreed. It lowers the risk of shipping a bad batch. It isn't a check of every unit.
Who does inspections for Notch Sourcing orders?
Our own team in China inspects the goods before they ship. We source almost any product from China through our specialist team on the ground. Send a brief at notchsourcing.com/#contact or email enquiry@notchsourcing.com.